I-25 Cable Barrier Phase IV

 Project Complete!

EL PASO and PUEBLO COUNTIES – The Colorado Department of Transportation began the fourth phase of cable barrier and guardrail installation on I-25, between Colorado Springs and Pueblo. Tricon 2, LLC has been selected for this project. Construction started June 22 and will continue into the fall, with work taking place primarily between Wigwam and Pikes Peak International Speedway.

In addition to the guardrail and cable barrier installation, the project will include flattening of slopes, mow strip paving, and culvert cleaning. Installation of cable barrier along this stretch of I-25 will enhance safety by reducing median crossovers. 

Project Facts

  • Cost: $2.2 Million
  • Contractor: Tricon 2, LLC
  • Timeline: June - mid-November, 2020
  • Location: I-25 Southbound from MP 122 at Pikes Peak International Speedway to MP 113 five miles south of Wigwam



Proposed Work Schedule

  • Construction started June 22 and will continue into the fall, with work taking place primarily between Wigwam and Pikes Peak International Speedway.  
  • Crews will work on a five mile stretch from milepost 116 to 121. 

Traffic Impacts

  • Travelers will encounter construction operations Sunday through Thursday, from 7 p.m. to 5:30 a.m., as well as Tuesday, Oct. 13 and Wednesday, Oct. 14 until 2 p.m. Daytime shoulder closures are expected the mornings of Oct. 13 and 14.The southbound left hand lane is expected to have closures most nights when work is being done.